Saddles

The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy. - All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits - Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against - Cromoly rails

The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy. - All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits - Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against - Steel rails

A light and lean performance saddle developed directly with Lidl-Trek athletes for comfort through the toughest races. - Race Shop Limited design was developed for the needs of Lidl-Trek athletes - OCLV Carbon shell provides a perfect balance of weight, strength, and compliance - Short profile provides targeted support for riders of any gender in a performance riding position - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Minimally bonded padding shaves weight and creates a sleek, high-end aesthetic - Oversized carbon rails for lightweight strength (specific seat post rail clamps required)

Another great value in the Terry line, the Butterfly Cromoly Gel takes comfort up a level with the addition of a thin gel layer along the top of the saddle. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. A wonderful saddle for endurance/distance riders, the Butterfly Cromoly Gel is wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails. - Smooth Dura-tek cover with printed accent - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 262mm x 155mm - Weight: 345 grams; 12.2 ounces - Rails: FeC alloy

For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy

This saddle was developed for bikers who enjoy taking on different terrain, such as gravel. It is designed with a very narrow front end to provide maximum freedom of the legs while pedaling, thus preventing bothersome rubbing and chafing. The Allroad also features an ample area of ischiatic support, with a slight lift on the edge of the back end to provide optimal support for the cyclist during long rides. The wide central opening ensures adequate blood circulation and prevents uncomfortable pressure. Finally, thick padding offers a pleasant feeling on off-road terrain. The Racing version features a woven material on the sides of the cover, a functional aspect that's important to protect the saddle in case of falls or scrapes against rough surfaces. - Rail: Stealth Xsilite - Shell: Carbon Fiber Reinforced - Foam: Biofoam - Cover: Microfeel - Dimension: 268 x 146mm - Weight: 175g - Level: Racing

Freeway Fit for Women combines the immediate comfort of a soft-touch cover with the shape memory of Selle Royal's new Slow Fit Foam. Slow Fit Foam is a visco-elastic material that molds to a rider's body and guarantees a uniform distribution of the weight. Compared to traditional foam padding, Slow Fit Foam reduces the hits and vibrations in the points of contact, improving blood circulation, and the intelligent placement of the padding allows for reduced saddle weight. - Dimensions: 380mm long x 158mm wide - Weight: 435g

Add Selle Royal comfort to all of your rides with their Gel Seat Cover. Added on top of your bike's seat, it cushions and eliminates pressure with Selle Royal's RoyalGel and elevated textile patches. This cover fits most exercise bikes at the gym, too, so you can enjoy all your workouts.

Selle Royal, Avenue Moderate, Saddle, Women, Black

The new WCS Skyline saddle keeps the ergonomic curve that supports sit bones and the generous cut-out to relieve perineal pressure of the original Skyline but updates it with new construction for more durability, better aesthetics, and a lighter weight. Built with a unique manufacturing technology that adheres the saddle cover to the base without any visible seams, glue, stitching, or staples, the new WCS Skyline is now waterproof, will last longer, and keeps the weight to a minimum. The saddle padding is made from a new lightweight polyurethane material that is 30% more shock-absorbent than traditional foam, which reduces rider fatigue. Like the original, the new WCS Skyline features a curved, two-axis shape that bring a rise toward the rear of the saddle and a bit of lift to the nose. This shape is ideal for riders who lack flexibility and want more support, yet still offers a good position for riders who demand a healthy dose of performance with their comfort. Another highlight of the Skyline is Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hots spots by dissipating pressure more evenly for all-day comfort for wherever your pedal strokes take you—road, gravel, trails, and beyond. - Vector Wing design - Curved, two-axis shape - Seamless cover & shell integration - Dimensions: 277x147mm - Rails: stainless steel - Rail dimensions: 7x7mm - Shell: Nylon + carbon fiber - Padding: super-light polyurethane foam - Cover: premium Ritchey synthetic upper - Weight: 227g

The Prologo Scratch M5 PAS uses innovative technology in terms of size, shape, and ergonomics, and is suitable for many uses and disciplines. Thanks to the new design, size, and ergonomic "T-Shape," Scratch M5 is suitable for men and women. The new MSS Multi Sector System improves comfort and performance, and the active foams that separate from each other create 5 mapped zones that work individually, supporting normal pedaling movement both during the pushing and pulling phases. The round shape of the Scratch M5 allows the pelvis to rotate naturally, creating stability and support for the lumbar areas. Despite the absence of a channel, the open base is able to eliminate pressure peaks. The PAS is a channel designed to eliminate pressure peaks and numbness, improving blood flow. Its particular ergonomic design, assisted by variable density foams, eliminates contact points and is ideal for users who prefer performance combined with comfort over long and medium distances. - Ergonomic multi-category saddle - Round shape increases sitting area and better support to the pelvic zone - Tirox is a light alloy steel with a standard round size of 7 mm - Long carbon-fiber base - Light padding with a microfiber cover - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 140mm - Weight: 185g

The PR 1.0 is set to reset your expectations of comfort. PR stands for Performance Recreation, as this seat is as comfortable on a hybrid bike as it is a full-blown race machine. Our PR saddles feature more padding than the other ISM performance saddles, making them perfect for cyclists that want a softer ride – whether you ride in padded cycling shorts, or regular everyday clothing. Like all ISM saddles, the PR 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Comfortable 50-series foam padding - New shape for improved thigh clearance and rider movement - Rear transition hook Commonly used for: - Hybrid bikes - Triathlon bikes - Mountain bikes - Road bikes Tech specs: - Category: Performance Recreation - Length: 245mm - Width: 130mm - Padding: 50-series foam - Rails: Satin Steel - Color: Black

The PR 2.0 fits into the Performance Recreation category – perfect for adding comfort to any bike. Compared to the PR 1.0, it has upgraded foam-and-gel padding, and racing-inspired graphics. It’s perfect for folks that want a touch more padding than our PS models, such as triathletes wearing thin racing shorts. Like all ISM saddles, the PR 2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - 40-series foam and gel padding for long-mile comfort - New shape for improved thigh clearance and rider movement - Rear transition hook Commonly used for: - Hybrid bikes - Triathlon bikes - Mountain bikes - Road bikes Tech specs: - Category: Performance Recreation - Length: 250mm - Width: 130mm - Padding: 40-series foam and gel - Rails: Satin Steel - Color: Black

Our original saddle. Inspired by the "morning routine". The Touring remains a great saddle for upright bikes and a popular choice for the Men in Blue. Several police departments around the country use the ISM Touring saddle. After all, these folks are spending an average of 25 hours a week in the saddle—it better be comfy! Great for use with padded bike shorts, or regular everyday clothing. Like all ISM saddles, the Touring is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Wide base for maximum stability and rider comfort - Sloped front design allows for easy mounting and dismounting - 60-series foam padding Commonly used for: - Hybrid bikes - Police bikes - City / Commuter bikes Tech specs: - Length: 6.88" (175mm) - Width: 7.67" (195mm) - Padding: 60-series Foam - Rails: Satin Steel - Color: Black

The Antares shape is wide and slightly curved in profile which is ideal for riders with medium spine flexibility. The Antares R1 benefits from improved weight distribution and a host of fi'zi:k technologies including a carbon double shell and Braided Carbon Rail, for the optimum blend of strength, support and light weight, and Wing Flex which enables flexibility where your thighs meet the saddle. - Composite Carbon co-injected Nylon WingFlex Shell - Carbon Braided 7x9mm rails - Black Gummy Microtex Cover - Black Microtex Thigh Glides - Integrated Clip System compatible Regular: - Dimensions: 275mm x 141mm - Weight: 160g Large: - Dimensions: 275mm x 152mm - Weight: 16 g

A new performance bike saddle with revolutionary 3D-printed padding, a high-modulus full carbon shell and carbon rails offers a new level of comfort and support on your rides. Performance cycling saddle with a revolutionary 3d printed padding offering seamlessly engineered zonal cushioning. A 3D PRINTED PADDING The evolution of digital 3D printing allowed us to develop a new saddle without the constraints or limitations imposed by traditional production methods and materials. The Adaptive saddle padding is crafted by Carbon using its revolutionary Digital Light Synthesis technology. DLS is an additive manufacturing process which uses digital ultraviolet light projection, oxygen permeable optics, and programmable liquid resins to produce parts with excellent mechanical properties, resolution and surface finish. TAILORED ZONAL CUSHIONING Using Carbon technology, biomechanists and engineers have an unprecedented possibility: to design and manufacture multiple functional zones within the saddle, tuning each of them separately for specific mechanical properties. Each of these key functional zones is engineered with a distinctive cushioning and mechanical response, joined together progressively and seamlessly in the same padding. LAB TESTED, ROAD PROVEN Professional cyclists and amateur riders were tested in both the fizik labs and on the road. During each development phase, every iteration was carefully tested. A great focus has been put on understanding how the pressure patterns change according to different bike geometries, riding positions, and riding styles. FROM AN IDEA, DIRECTLY TO SCALABLE PRODUCTION Thanks to this one-of-its-kind combination of process and material, we’ve been given the chance to develop a product five times faster, creating and field-testing hundreds of iterations. Being applicable to mass production, this technology completely remaps the traditional manufacturing process, accelerating and leaping over all intermediate phases. LONG-LASTING PERFORMANCE The saddle is very easy to clean. Even with the filthiest road muck, all you need to do is simply hose it over with water. Whatever gets in, gets out. We’ve put it through the most severe tests, simulating accelerated weathering, UV aging and wear resistance by following strict protocols. Specs: - ADAPTIVE: Carbon Digital Light Synthesis 3D printing technology, offering seamlessly engineered zonal cushioning - VERSUS EVO: full channel design for pressure relief on soft tissue area - 00: a combination of a high module full carbon shell and a carbon rail for ultimate stiffness and lightness - MOEBIUS RAIL: (7 x 10mm) patented closed loop design for a balanced weight distribution

Arione R3: the Arione is longer than any other saddle, flat from nose to tail and with a narrow nose, so you can move around to find your power spot. The Arione R3’s Composite Glass co-injected Nylon shell provides the best support with optimized stiffness to-weight construction – with Wing Flex technology which enables flexibility where the rider's thighs meet the saddle – and an alloy K:ium rail for light weight. - Shell: Composite glass co-injected Nylon WingFlex - Rail: K:ium - Cover: Thermowelded Microtex - Thigh Glides: Thermowelded Black Microtex - Weight: 200 grams - Dimesions: 300x130mm - Integrated Clip System compatible - Spine Concept: Snake

A favorite in the peloton and on almost any club ride, Fizik's Arione is the saddle of choice for road riders around the globe. The carbon-reinforced Wing Flex shell moves with the rider's pedal stroke, offering unmatched comfort and an exceptional fit. And, as always, it boasts the features and quality you expect from a Fizik: a Microtex cover with efficiency-enhancing thigh glides, light, strong Kium rails, and supportive, comfortable padding for on-the-road comfort.

TEMPO ARGO R3 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R3 150 - Length: 260mm - Width: 150mm - Weight: 229g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm SPECIFICATIONS: TEMPO ARGO R3 160 - Length: 260mm - Width: 160mm - Weight: 235g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

TEMPO ARGO R5 is a versatile endurance road saddle with a short-nosed design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the Fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Tempo: Versatility road series designed for the most enjoyable riding experience - Argo: versatile short nose saddle that encourages stability and reliefs pressure on soft tissue area - R5: a combination of a ride compliant carbon-reinforced nylon shell and an S-Alloy rail - Wingflex: the shell's side edges flex and adapt to rider's inner legs movement - Type 2 foam: progressive cushioning, with lower compression modulus - Tempo Argo R5 regular 150mm - endurance cycling bike saddle SPECIFICATIONS: TEMPO ARGO R5 150mm - Length: 260mm - Width: 150mm - Weight: 241g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm - Tempo Argo R5 large 160mm - endurance comfortable road cycling saddle SPECIFICATIONS: TEMPO ARGO R5 160mm - Length: 260mm - Width: 160mm - Weight: 247g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

VENTO ARGO R1 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R1 140 - Length: 265mm - Width: 140mm - Weight: 179g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm SPECIFICATIONS: VENTO ARGO R1 150 - Length: 265mm - Width: 150mm - Weight: 186g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm

Do you live an active lifestyle? On longer bike rides do you value saddle comfort? Then the ergonomic Ergon SF Men Sport Gel saddle should not be missing from your bike! Our new fitness saddle ensures that your cycling enjoyment is not clouded by saddle problems. A perfect balance of sportiness and comfort, the SF Men Sport Gel distributes pressure evenly, which is an added bonus on longer rides. To avoid the common male discomforts and numbness, the anatomically adapted relief channel in the center of the saddle removes pressure from the sensitive soft tissue areas. In addition, the shape and high-quality padding of the saddle are adapted to the position of the upper body during sporty cycling and provides optimum support of the sit bones. - Aids in achieving your fitness goals - Prevents male discomforts and numbness - Sporty and comfortably padded

Do you live an active lifestyle? On longer bike rides you value the best seating comfort? Then the ergonomic Ergon SF Women Sport Gel saddle should not be missing from your bike! Our new fitness saddle ensures that your cycling enjoyment is not clouded by saddle problems. A perfect balance of sportiness and comfort, the SF Women Sport Gel distributes pressure evenly, which is an added bonus on longer rides. To avoid the common female discomforts and numbness, the anatomically adapted relief channel in the center of the saddle removes pressure from the sensitive soft tissue areas. In addition, the shape and high-quality padding of the saddle are adapted to the position of the upper body during sporty cycling and provides optimum support of the sit bones. - Aids in achieving your fitness goals - Prevents female discomforts and numbness - Sporty and comfortably padded

The E-MTB specific comfort saddle for men. Tailored for prolonged seated climbing and particularly steep ascends. The shape matches the male anatomy with relief in the perineal area, effectively preventing discomfort. It features dynamic comfort padding and a ramping tail with a flat circumference for great freedom of movement. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. Sliding flanks help reduce friction when pedaling.

Ergon SMC mountain bike saddle. Further refined for even more comfort, the orthopedic foam is thicker, softer and creates a large contact area. Features a flat seat for dynamic sitting in different positions without tilting effects. - Orthopedic padding provides enhanced support and optimal pressure distribution - Provides optimal pressure distribution for sit and pelvic bones, the contoured surface area helps prevent saddle discomfort - The relief channel helps to avoid numbness and provides increased protection for soft-tissue areas

SME3 Series – the saddle used by Richie Rude (Yeti-Fox) and Fabien Barel (Canyon Factory Enduro Team), the top riders of the Enduro World Series. The entry-level model, SME3, offers every feature that enduro and gravity racers demand. Through specific design features, the saddle allows for uninterrupted rider position changes. The demands of enduro and gravity riding are reflected in the form of the saddle padding as well, which overall is relatively flat, with no kick up in the rear. This allows for fast position changes from sitting, to standing, to behind-the-saddle descending. The EVA padding with micro air pockets and a flex optimized shell boosts comfort while pedaling uphill and on long flat traverses. - Rail: chromoly - Cover: microfiber - Padding: orthopedic AirCell foam

Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.

Among Brooks' most loved products, the B67 S women's saddle has inspired generations of cyclists to explore the open road on two wheels. The B67 S uses a women's-specific shape, and single saddle rails for increased compatibility with modern seat posts. It's an ideal all-rounder for cyclists who like their handlebars higher than their saddles, perfect for city riding or weekend adventuring. And, of course, the B67 S features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

The Cambium C15 All Weather Carved is made for years of hard riding in a forward riding position, and features hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.