Accessories

Profile's Race Number Belt speeds you through T2. Its easy-to-use lace locks make attaching your number for the run simple and secure. And its minimal buckle is sleek and simple.

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

No winter riding kit is complete without the proper headwear. The AmFIB® Lite Balaclava will help you conquer the cold with technical fabrics and thoughtful cycling features. Polartec® Wind Pro® fabric on the leading edge blocks the wind, while the highly breathable thermal fabric on the top and back keeps you from overheating. The hinged face covering is easy to pull down for eating and drinking, or to dump a little heat while climbing. It fits comfortably under a helmet and a ponytail port in the rear adds to the appeal of this full-featured balaclava. FEATURES: - Pedal to Zero™: Going by bike 5mi / 7km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Hinged face covering is easy to pull down when needed - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

All it takes is one experience with cold ears on a fall day to understand the value of a headband in your riding wardrobe. This cold-weather essential uses Polartec® Wind Pro® fabric on the leading edge to block the wind and highly breathable thermal fabric on the back to keep you from overheating. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 4mi / 6km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Fits easily under a helmet - Protects ears from cold - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane

Ride through winter in more comfort with the AmFIB® Lite Skull Cap. This cold-weather essential uses Polartec® Wind Pro® fabric on the leading edge to block the wind and highly breathable thermal fabric on the top and back to keep you from overheating. It’s designed to fit easily under your helmet and comes down enough on the sides for crucial ear protection. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 3mi / 5km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

A snug and streamlined full head cover with a wind-resistant front panel to keep you cozy in the thick of winter. Precisely tailored to fit under a helmet, the Barrier Skull Cap's mildly scalloped back prevents fabric bunching while in the cycling position. P.R.O. Thermal Dry fabric provides quick-drying warmth, reflective elements enhance safety, and an otherwise hidden rear port opens as needed to accommodate a ponytail. - P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance - P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth - Ergonomic cut layers easily under helmet - Low profile ponytail port allows for long hair and does not interfere with helmet retention mechanisms - Reflective elements for low-light visibility - One size fits most

Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won't leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic left- and right-specific fit - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Imported

Transform any pair of cycling shorts into a knicker with these super-versatile knee warmers. A general rule is to keep knees covered up to 60 degrees, which means these warmers could see action all year long. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding - PI Dry technology for all-weather performance made with anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - Anatomic left- and right-specific fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

Now updated with water shedding PI Dry technology for all weather performance, this is the easiest way to add some knee saving warmth to a pair of shorts. The tailored fit won’t slip and is perfectly designed to keep your pedal stroke fluid. - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility

An essential accessory for any level of rider, these leg warmers transform your shorts into much warmer full-length tights. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But, our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for puddle-charging splash resistance and more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy on-and-off - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

FEATURES - UPF rated 50+ ripstop cotton - Vintage style flat brim - Stretch elastic adjuster with snape buckle closure - Old school puff print technique - Mesh insert in front panel - Brushed cotton twill material

Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane

Proven to deliver UPF 50 protection even when the fabric is stretched by 30 percent, the lightweight material used for these slip-on knee covers will keep you covered and cool so you can lay down the hammer at the height of summer. - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

More fun, less sun. With increased UPF coverage and better durability, these updated sleeves give you up to UPF 50 even when stretched by 30 percent, delivering longer-lasting sun protection so you can safely pedal at the brightest times of day.  - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

Nothing beats the all-around protection of a winter cycling cap. Not only does this piece keep your head and ears warm, but the bill forms a seal over your glasses to shield your eyes from wind and rain. This cold-weather essential is built with thermal fabric that balances insulation with breathability. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 4mi / 6km offsets the climate impact of this garment - Made with recycled materials - Fits easily under a helmet - Protects ears from cold - Shields eyes from wind and rain - Rear port for ponytails FABRIC: - 79% recycled polyester, 21% spandex

Winter weather can be highly variable. Reach for our Thermal Neck Gaiter when you’re not sure exactly what Old Man Winter has in store. This versatile piece can be worn around the neck, face, or head, depending on your insulation needs. The thermal fabric insulates and is highly breathable, plus it’s made with recycled materials. FEATURES: - Pedal to Zero™: Going by bike 4mi / 7km offsets the climate impact of this garment - Highly versatile winter staple - Constructed from breathable thermal fabric - Made with recycled materials FABRIC: - 79% recycled polyester, 21% spandex

Ditch that odd-ball head tan! This UPF 50 cap is made from lightweight Transfer fabric for optimal breathability and sweat absorption. Minimal silicone grippers give it that barely there feeling that is critical for a comfortable under-your-helmet fit. - P.R.O. Transfer fabric provides optimal moisture transfer, dry time and odor absorption - Provides UPF 50+ sun protection         - Lightweight elastic band for secure fit - Anatomic paneling for a performance fit - 93% polyester  7% elastane

Giro's Ambient Toe Covers add just the right amount of extra warmth on cool rides. Wind- and water-resistant neoprene covers are lined with AGrid fleece for warmth and protection from the elements. Reinforced toe guards add durability and reflective accents enhance visibility. - Small (36-39) | Medium (40-42) | Large (43-45) | X-Large (46-48)

If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece

This GORE WINDSTOPPER cap is extremely flexible and lightweight, providing a comfortable way to keep your head and ears warm in chilly weather. The cap is extremely moisture wicking, ensuring you stay dry no matter how hard you pedal. - Windproof frontal and lateral protection with elastic GORE WINDSTOPPER fabric - Elastic binding on edges - Reflective details

Made of comfortable neoprene, FuelBelt's Timing Chip Band stays put. It also has a Velcro closure that is easy to adjust.

On cold winter nights riding in the desert, the Women's Indio Beanie adds warmth and a little bit of fun thanks to the pom top. The Indio is sure to be your cool-weather cap of choice this riding season. - Pom beanie - Clamp label - Fold over style - 100% Acrylic

The perfect hat to top off your daily look. - An iconic logo and quality materials make our headwear a long-lasting staple - 100% Cotton Woven Twill - Front sublimation with embroidery/ sublimated underbill

Some times simple is beautiful. The Machinist Beanie keeps your head warm with a clean look that never goes out of style. - Roll cuff beanie - Fox Racing clamp label on cuff - 100% Acrylic - One size fits most

DeFeet Armskins are designed to provide a guard against the elements in chillier temperatures, making your rides and runs more comfortable. Armskins are engineered with an easy-on, easy-off stretch fit, covering from the wrist to the top of the biceps, and are ideal for cycling, running, and hiking to keep you warm in cold, wet conditions. Recommended for temperatures between 30° and 50°. - 66% Merino Wool, 31% Nylon, 3% Lycra

DeFeet Armskins are designed to provide a guard against the elements in chillier temperatures, making your rides and runs more comfortable. Armskins are engineered with an easy-on, easy-off stretch fit, covering from the wrist to the top of the biceps, and are ideal for cycling, running, and hiking to keep you warm in cold, wet conditions. Recommended for temperatures between 35° and 55°. - 49% Recycled Polyester, 48% Nylon, 3% Lycra

- Made from recycled water bottles in North Carolina, USA - Content: 55% Recycled Polyester, 45% Lycra/Nylon - Care: Machine wash cool. Tumble dry low. No bleach, softeners, or harsh detergents. - Maximum thigh circumference of 25 in (63.5 cm) The form-fitting Kneeker is designed to protect and warm the knee and quadricep when riding, covering from mid-thigh to mid-calf. Also available in full-length. How to wear the Kneeker: Bunch up the Kneeker and use both hands to pull it up to the knee. Then pull the top up to overlap with bib shorts, pulling the bib shorts over the Kneeker at the top of the thigh. For the full-length Kneeker, pull the bottom down to overlap with socks. If the Kneeker is sliding down, it means there's north-south tension pulling from the bottom of the Kneeker; the Kneeker should only have east-west tension. This will keep it from pulling down. The overlap of the bib shorts holds the Kneeker in place.

92% Nylon, 8% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity.

Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding