Parts & Accessories

- Allows for tool-free removal of your water bottle cage from your frame - Especially useful for quickly and easily removing a bottle cage before a race - Compatible with nearly every existing water bottle mount on your frame - For best compatibility, use with Bontrager RL or RXL bottle cages - Also compatible with some other bottle cages - Do not torque installation fasteners past 1.5Nm

When you need to keep your warm beverages hot and your cold beverages chilled, reach for the Trek Ride Bikes Have Fun Tumbler. It's perfect for any occasion and always reminds you to ride bikes, have fun, and feel good. - Stainless steel design - 20 fl oz (591ml) - Do not microwave - Hand washing and drying is recommended

Reaching your water bottle becomes even easier by repositioning your bottle cage higher, angled up and inline with the upper body. - Mount for holding bottle cage - Holds bottle at an angle for easier reach

SILCA's reusable, sustainable titanium straws are laser-engraved with the SILCA logo and hand anodized. Take them wherever you go! The set of straws feature one straight and one bent straw option to cater to different size cups. Early in the Ti Bottle Cage development process, we realized that we could yield 6 cages per stick of tubing from the mill but were left with roughly 1" of scrap tubing per cage.  By modifying our bending and using the thinnest possible cutting blades, we now have exactly 8.5" of leftover Titanium tubing for every 6 bottle cages produced.  This means that the ONLY waste from the Ti Cage production process is in the saw kerf (material turned into shavings when cutting) giving us a 99.9% material utilization rate! - 6.35mm Diameter 3/2.5 Titanium tubing - One straight 8.5" + One bent 8.5" Titanium Straw - Dishwasher Safe - Avoid using abrasive cleaning pads - Straws are ultrasonically cleaned in our factory, but it's a factory...please wash them before using it! - Rainbow anodize is done completely by hand in a process that involves an operator raising and lowering the straw while manually altering the voltage. As a result, no two will be quite the same and will all be slightly different from the photos.

Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands

Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.

Osprey's Hydraulics LT 1.5L Lumbar Reservoir by Hydrapak is made for those who prefer an off-the-shoulder hydration solution. Designed to fit in most lumbar packs, but perfectly pairs as an extra or replacement reservoir for Osprey's Seral lumbar mountain biking pack. Twin-welded chevron baffles stabilize the water and maintain a flat profile. Thoughtful design makes filling, cleaning, and—most importantly—staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations. - Twin-welded chevron baffles stabilize the water and maintain a flat profile - Easy Slide-Seal top opening, seals watertight and provides wide access for easy filling and cleaning - Magnet clip attaches to the reservoir hose and pairs with the included sternum strap magnet for easy water access and hose management - Hydrapak Blaster bite valve offers fast, smooth water flow with a 1/4 twist on/off switch

Make any pack Hydraform Reservoir-compatible with Osprey's Hydraform Magnet Kit. This handy kit includes three detachable sternum-strap magnets.

Osprey’s Hydraulics 2L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics Bite Valve provides a high-quality replacement for your old, neglected and beat up bite valve. The bombproof ¼ twist shut-off design guarantees you won’t experience any unpleasant leaks.

Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

When it’s time to replace the hose on your existing hydration system, Osprey’s Hydraulics Reservoir Hose is the answer. Made of high-quality quarter inch tubing for dependable performance and featuring a high flow rate, it will bring new life to your hydration system. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

5-serving polyethylene gel flask - High-density polyethylene with molded finger grips - Secure cap to keep dust out - Easy to clean - Holds five Hammer Gel servings - 2.25" x 5.75" - 5.82oz / 172.11 mL DESCRIPTION: An economical and efficient way to carry Hammer Gel, Perpetuem, or Sustained Energy. Easy to clean, this flask is dishwasher safe (top rack).

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.

Probably the easiest way to clean your reservoir, CamelBak's Cleaning Tablets work in just five minutes. They prevent bacteria buildup, odor, and get rid of bad taste. One tablet cleans a 100-ounce reservoir.

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

Everything you need to clean your Crux reservoir.

Dry your reservoir quickly with the CamelBak Reservoir Dryer.

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!