Skip to main content

Keep up with everything Wheel! Sign Up

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$179.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
$299.99
Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side
$350.00
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams
$24.95
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
$48.26 - $54.95
A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"
$74.95
These pedals re-work the classic parallelogram pedal design to offer increased grip, support and weight savings for anything from all-mountain, to dirt jump, to downhill. - Large aluminum alloy platform profile for more surface area and improved grip - Thin 16mm depth and concave body design - Chromoly axle with sealed bearings - Replaceable/tunable pins for preferred grip - 9/16"
$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$15.99
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a Removable reflector for mounting prior to purchase - Includes mounting hardware. Note metal plate may not be required during installation.
$9.00
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm
$9.99
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
$9.99
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
$11.00
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
$11.00
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
$16.00
Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface
$16.00
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
$19.99
Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g
$19.99
Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g
$26.00
Dimension Mountain Compe Pedals. - Forged aluminum body - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 335g
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g
$49.99
Dimension Mountain Pro Pedals. - Forged aluminum body - Sealed bearings - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 270 g
$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
$15.99
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
$15.99
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
$52.00
Pedal built with quality materials. It features a strong, aluminum body, and a Cr-Mo axle on a slimline dual bearing system. - LSL bushing & sealed bearings - Tension gauge - Aluminum Body with CNC-Machined chromoly spindle - Includes E-RSL1 SPD-SL Style Cleats and mounting hardware
$73.50
Full Contact Road Pedals A pedal built with quality materials. It features a strong body, abrasion guard, a Cr-Mo axle on a slimline dual bearing system, and a gauge makes precise binding tension adjustment easy. - E-RSL11 Cleats - Abrasion guard - Tension gauge - Full Contact Body - Full contact fiberglass-reinforced thermoplastic body with stainless steel abrasion guard - CNC chromoly heat treated axle with LDL brushed and sealed bearings - 9/16"
$20.95
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
$31.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g
$47.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction - 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner bushing/dual-outer sealed bearing system - Weight: 315g