Skip to main content

Keep up with everything Wheel! Sign Up

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$19.99
Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware
$17.99
Original equipment replacement rear derailleur hangers. Get back on the road with a quality replacement hanger. Product details - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications - Mounting location: Rear drive side - Attachment: 1-bolt
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$6.50
Genuine replacement parts Genuine replacement parts Original Equipment specifications. Compatible with Bosch Powertube RIB batteries. - Hardware should be ordered separately
$2.99
Product details - Use in chainstay pocket to seal sensor into frame
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Bontrager XXX Integrated bar/stem, as seen on the Emonda SLR 10 - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$12.99 - $14.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$15.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately
$44.09
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$22.09
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
$26.99
Replacement saddle ears for use with Bontrager saddles. - Compatible with: Madone 2016+, Domane 2019+, Speed Concept 2022+, and road alloy mast cap - For use with Bontrager 2-bolt seatpost and seat mast systems
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$9.40
Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375
$9.99
Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed. - Includes 2 clamps and screws
$33.99
• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes
$30.09 - $57.79
• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)
$6.99 - $7.99
- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately
$11.89
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT
$11.09
- CNC-machined chromoly steel lockrings - 1.29" x 24tpi LH
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$10.95
Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision. - Cable Tension Barrel Adjusters - STI compatible - Adjust the cable tension for optimal STI shifting
$13.99
- Alloy 1-1/8" seatpost clamp - Double clamp design for extra holding power on BMX bikes
$6.49
- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation
$9.49
- Alloy 1-1/8" seatpost clamp - Single bolt
$13.99
- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"
Page 1 of 24 Next page