Filter By:
- Parts & Accessories (46)
- CO2 Inflators (45)
- Floor Pumps (39)
- Frame Pumps (8)
- Mini Pumps (63)
- Shock Pumps (9)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pumps/Inflation
$0.99
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
$0.99
Converts Presta valves for use with Schrader-compatible inflation devices.
- Machined aluminum is lighter than brass alternatives
- Rubber O-ring provides a secure seal to prevent air leakage
- Jar of 150
$1.99
• Compatible with Air Support HP, HP Pro, HV (429231, 429232, 429233, 429234, 429235)
$2.19
- Genuine Sunlite replacement hose
- Type: Fits Sunlite Frame Pump : 5.25mm
$3.39
Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution!
Built to convert your old schrader pump into a Presta pump!
$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$5.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$5.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$5.99
- Genuine Sunlite replacement hose
- Type: Fits Sunlite #4301 : 16 5.8mm"
$5.99
- Genuine Sunlite replacement hose
- Type: Fits Sunlite #4301 : 16 5.8mm
$8.99 - $49.99
CO2 replacement cartridges
Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy.
- Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators
- Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants
- 100% recyclable steel cartridges
- All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
- Unable to ship to Canada
$8.99
CO2 replacement cartridges
Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy
- Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators
- Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminantsa.
- 100% recyclable steel cartridges
- All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
- Unable to ship to Canada
$8.99 - $99.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy.
- Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators.
- Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants.
- 100% recyclable steel cartridges
- All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
$8.99
- High effeciency design
- Lightweight composite construction
- Thumb lock release
- Reversible Presta/Schrader with bracket
$9.99 - $49.99
CO2 replacement cartridges
Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy.
- Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators
- Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants.
- Note - unable to ship CO2 to Canada
- 100% recyclable steel cartridges
- All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2.
- All 16g cartridges are compatible with the Airship 2.0.
$9.99
- Comes with Dual Head
- Compatible with all Planet Bike floor pumps
- #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head
$10.59
Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.
$10.99
Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.
$10.99
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps
- Dual head with hose
- Will work with any floor pump Planet Bike has made except for Air Supreme
$11.18
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
$11.99
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
$11.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$12.99
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
$13.99
- Replacement ABS Flex Hose for Lezyne hand pumps
- Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
$14.99
This is our smallest and lightest mini pump. Stash the MicroPro in your jersey pocket and be a roadside hero. You won't even know it's along for the ride until you really need it!
$14.99
Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.
$14.99
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs.
- Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use
- Threads directly onto Presta or Schrader valve without adapter
- Compatible with threaded cartridges
- Small size fits in saddle bag or jersey pocket
- Size: 48 x 40 x 25 mm
- Weight: 56 grams
$14.99
• Presta and Schrader valve compatible head
• Hose and head kit fits most floor pumps
$14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$15.99
Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.
$15.99
- Dual head mini road pump
- Presta/Schrader compatible head
- High pressure/high volume switch
- Ergo fit T-handle
- 120psi max
$15.99
- Mini multisport pump perfect for taking along on the next adventure
- Ball needle and inflator included
- Presta/Schrader reversible head
- 2-way pumping action
- Twist lock valve connection
- 80 psi max
- Head Type: PV/SV
$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$16.99
Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.
$16.99
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators
- 38-gram threaded cartridges are sold individually
$17.00
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$17.50
The Blast CO2 inflator features for its compat and light weight body and simple push on inflation for racing and quick puncture repair that helps rider bet back on trail in a short time.
$17.99
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
$17.99
If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike.
- Designed with a low pressure range of 2-15 psi specific for fat bike tires
- Durable case and crystal lens
- Retains reading until reset
- White face plate for easier reading
- Compatible with Presta valves with removable core
- Presta/Schrader adaptable head
- Length: 120mm
- Weight: 101 grams
$17.99
Planet Bike's Ozone ATB AL Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a sturdy aluminum barrel, a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.
$18.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves.
- Inflator only height: 44 mm (1.75")
- Inflator only weight: 40 g (1.5 oz)
$19.99
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
$19.99
Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.
$19.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge.
- Weight: 26g
- Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components
- CNC machined aluminum parts for precise and durable construction
- Press on/off valve operation functions like a trigger, providing easy and precise inflation
- Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves
$19.99
Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.
$19.99
Origin-8's Air Surge 2-Stage Frame Pump features a large, telescoping barrel that inflates tires quickly with its simple Presta/Schrader valve head. You'll love the great, ergonomic T-handle and convenient mounting bracket.
$19.99
Origin-8's Pro Pulsion 2-Stage Gauge Pump features a large, telescoping barrel that inflates tires quickly, and a reversible Presta/Schrader valve head. Dial in your pressures with the precision in-line gauge. And, you'll love the great, ergonomic T-handle and convenient mounting bracket.
$19.99
Blast off with Planet Bike's Airship 2.0 CO2 Bike Tire Inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride.
- Lightweight aluminum design stores cartridge and protects from cold cartridge when in use
- Auto head fits both Presta and Schrader valves
- Accepts 16g threaded and non-threaded cartridges
- Includes one 16g threaded CO2 cartridge
- Small size fits in saddle bag or jersey pocket
- Length: 130mm
- Weight: 123 grams
$19.99
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride.
- Precision-machined body and head for improved reliability and ease of use
- CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use
- Fits Presta and Schrader valves without adapters
- Compatible with threaded cartridges
- Small size fits in saddle bag or jersey pocket
- Size: 45 x 32 x 21 mm
- Weight: 24 grams (without CO2 cartridge)
Page 1 of 4
Next page